Lampshade Studio

Lampshade studio

237 × 207 mm, fits the Bambu Lab H2S
Drag the curve points to draw the profile.
Starting shape
200 mm
240 mm
60 %

Double-click the curve to add a point. Alt-click a point to remove it.

Relief type
24
4.0 %
90°
30 %
10 %

The fade erases the ribs near the rims: the first layer stays a clean circle, which sticks properly to the plate.

Top end
Socket
E27
Choose socket
E27
E14
GU10
Hanging cable
Custom
40 mm
10 mm

Usual bore for an E27 ring. Check yours: rings run from 38 to 42 mm.

1.6 mm
Printer
Bambu Lab H2S
Choose printer
Bambu Lab A1 mini
Bambu Lab A1
Bambu Lab P1P
Bambu Lab P1S
Bambu Lab X1 Carbon
Bambu Lab X1E
Bambu Lab H2D
Bambu Lab H2S
Prusa MINI+
Prusa MK4
Prusa XL
Creality Ender 3
Elegoo Neptune 4
No limit
24

Screen 367×91, export 576×144, that is 24 facets per rib

Drag: rotate · wheel: zoomOne finger: rotate · pinch: zoom

Filament

Meridian7 points

Click a point to select it. Double-click the curve to insert one.

Max Ø
236.9 mm
Height
206.7 mm
Bottom opening
133.6 mm
Bore
40 mm
Max overhang
54.8°
Top plate
37.3 mm
Material
252 cm³ · 312 g

How it works

Three minutes, no 3D software, no account. You pull a few points, the lamp takes shape, you leave with the file.

  1. 1. You draw

    One curve, a handful of points to pull. The shape updates while you move the mouse, in 3D, straight away.

  2. 2. You adjust

    Height, diameter, relief, thickness, socket size. The measurements show at the bottom, and we tell you whether it fits your printer.

  3. 3. You print

    An STL file ready for your slicer. Stand the lamp upside down on the plate and off you go.

Would rather tinker?

The same lampshade exists as an OpenSCAD file, with exactly the same settings. The Copy button hands you the block to paste into it.

Download the .scad